• Department of Electrical & Electronics Engineering

Publication

Manufacturing Engineering (PG) - Publication Activities

Name of the Faculty Designation Title H-index Name of the Journal
Dr.P.Karuppuswamy Professor and Head Recycling of LM25 aluminum alloy scraps Mechanical Testing/Materials Testing
Dr.P.Chandramohan Professor Enhancement of mechanical properties of epoxy hybrid nano-composites through hybridization of Carbon nanotubes and alumina nanoparticles. Digest Journal of Nanomaterials and Biostructures, Vol. 13, No. 2, pp. 483 - 489 , ISSN: 1842 -3582
Mr.N.SenthilKannan Assistant Professor(Sl.Grade) Integrated approach for product optimization in a rolling mill using fuzzy MCDM tools International Journal of Additive and Subtractive Materials Manufacturing, 2018 Vol.2, No.1, pp.25 - 44
Mr.R.Raghu Assistant Professor In-situ generation of MgAl2O4 particles in Al-Mg alloy using H3BO3 addition for grain refinement under ultrasonic treatment Measurement, Vol. 129, pp.389-394.,ISSN: 0263-2241
Dr.P.Chandramohan Professor Wear and friction behaviour of basalt nano fillers reinforced epoxy nano composites Journal of Balcon Tribological Association, Vol. 24, No. 3, pp. 484-495.,ISSN 1310-4772
Mr.B. Brailson Mansingh Assistant Professor(Sr.Grade) Numerical and Experimental Investigation on heat dissipation in High Speed Spindles Journal of the Balkan Tribological Association & Balkan Tribological Society. Vol. 25, No. 3, pp. 821-831 ISSN No. 1310-4772
Dr.P.Chandramohan Professor Laser additive manufactured Ti-6Al-4V alloy: Texture analysis. Materials Chemistry and Physics, Elsevier Publications, Vol. 226, pp. 272-278, Impact Factor: 2.210
Mr. P. Jidhesh Assistant Professor Experimental investigation of sandwich glazed solar photovoltaic module Materials today: Proceedings ISSN No: 2214-7853
Dr.P.Chandramohan Professor Optimization of milling parameters of ASTM a 995 grade 4A Duplex Stainless Steel using Taguchi Technique International Journal of Recent Technology and Engineering (IJRTE), Blue Eyes Intelligence Engineering & Sciences Publication, Vol 8 No.3, pp 5840-43, ISSN: 2277-3878
Dr.P.Chandramohan Professor Development of MgAl2O4 grain refiner in Al in-situ composite through H3BO3 addition IOP Conf. Series: Materials Science and Engineering, Vol 655, 012039, doi:10.1088/1757-899X/655/1/012039, Impact factor 0.53
Dr.P.Chandramohan Professor Performance of photovoltaic water pumping systems under the influence of panel cooling Renewable Energy Focus, Elsevier Publications, Vol 31, pp 31-44, ISSN: 1755-0084, Impact factor 0.219
Dr.P.Chandramohan Professor A high strength and wear-resisting AA5083 alloy for armoured vehicle applications: structure property correlation. International Journal of Heavy Vehicle System, Inderscience publisher, ISSN online: 1741-5152; ISSN print: 1744-232X, Vol. 27, Nos. 1/2, Impact factor 0.308.
Dr.J.Yoganandh Associate Professor Preparation and characterization of pulsed electrodeposited cobalt–graphene nanocomposite coatings 5 Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications
S.Dinesh Assistant Professor(Sr.Grade) Effect of fluid flow diversion and venturi size on drip irrigation fertilizer feeding system Flow Measurement and Instrumentation
Dr. P.Chandramohan Professor Effect of fluid flow diversion and venturi size on drip irrigation fertilizer feeding system Flow Measurement and Instrumentation
P. Balamurugan Assistant Professor Effect of fluid flow diversion and venturi size on drip irrigation fertilizer feeding system Flow Measurement and Instrumentation
Dr.P.Karuppuswamy Professor and Head Investigation of zirconium coating by solgel processes on A216 steel The International Journal of Advanced Manufacturing Technology
Dr.P.Karuppuswamy Professor and Head Study the effects of surface coating on impeller and volute casing to improve the efficiency of the water pump Desalination and Water Treatment
Dr.P.Karuppuswamy Professor and Head Optimal corrosive behavior on the weldment of AA6063 aluminium alloy by tungsten inert gas welding process with backing plates Metallurgija
S. Omprakash Assistant Professor(Sr.Grade) Optimal corrosive behavior on the weldment of AA6063 aluminium alloy by tungsten inert gas welding process with backing plates Metallurgija
Dr. C. Bhagyanathan Associate Professor Recycling of LM25 aluminum alloy scraps Mechanical Testing/Materials Testing
Dr. C. Bhagyanathan Associate Professor Investigation of zirconium coating by solgel processes on A216 steel The International Journal of Advanced Manufacturing Technology
Dr.M.S.Sureshkumar Assistant Professor(Sl.Grade) Investigating the influencial parameters of the surface quality of drilled hole in fiber reinforced composites: A mini review American Institute of Physics Conference Proceedings
Dr.N.Srimath Professor Comparitive study on cyruogenic treatment applied to cemented cardide inserts on tool wear American Institute of Physics Conference Proceedings, AIP Publishing
Dr.B.A.Saravanan Professor A Study on Welding Parameters of Aluminum 5086 Using Friction Stir Welding Journal of Adv Research in Dynamical & Control Systems & Institute of Advanced Scientific Research
R. Raghu Assistant Professor Experimental investigation of microstructure, mechanical and wear characteristics of Cu-Ni/ZrC composites synthesized through Friction stir processing Archives of Metallurgy and Materials
T.Velmurugan Assistant Professor(Sl.Grade) Experimental investigation of microstructure, mechanical and wear characteristics of Cu-Ni/ZrC composites synthesized through Friction stir processing Archives of Metallurgy and Materials
R. Raghu Assistant Professor Influence of Parameters on Sliding Wear of Titanium Nitride Coated 6061 Aluminium Alloy Tribology in Industry
R. Raghu Assistant Professor Optimization of Three Body Abrasive Wear Behaviour of Stir Cast A356/ ZrSiO4 Metal Matrix Composite Tribology in Industry
T.R.Sathish Kumar Assistant Professor(Sl.Grade) Performance investigation on fin type solar still with paraffin wax as energy storage media Journal of Thermal Analysis and Calorimetry
Dr.N. Srimath Professor A review on Optimization of weld bead geometry for industrial automation International Journal for Pure and Applied Mathematics
N. Senthilkannan Assistant Professor(Sl.Grade) Integrated approach for product optimization in a rolling mill using fuzzy MCDM tools Internal Journal of Additive and Subtractive Materials Manufacturing
Dr.P.Chandramohan Professor Effect of surface treatment and stacking sequence on mechanical properties of Basalt/Glass epoxy composites Polymers and Polymer composites
Dr.P.Karuppuswamy Professor and Head An effective Sorenson-single linkage clustering hybrid algorithm for cell formation problems in cellular manufacturing industry Concurrency and Computation: Practice and Experience
Dr. C. Bhagyanathan Associate Professor An effective Sorenson-single linkage clustering hybrid algorithm for cell formation problems in cellular manufacturing industry Concurrency and Computation: Practice and Experience
S. Sathish Assistant Professor(Sr.Grade) An effective Sorenson-single linkage clustering hybrid algorithm for cell formation problems in cellular manufacturing industry Concurrency and Computation: Practice and Experience
Dr.P.Karuppuswamy Professor and Head Numerical And Experimental Investigation On Heat Dissipation In High Speed Spindles Journal of the Balkan Tribological Association & Balkan Tribological Society. Vol. 25, No. 3, pp. 821-831 ISSN No. 1310-4772
R. Raghu Assistant Professor Investigations on microstructure, mechanical, and tribological behaviour of AA 7075–x wt.% TiC composites for aerospace applications Archives of Civil and Mechanical Engineering
R. Raghu Assistant Professor Microstructure and mechanical properties of Al/MgAl2O4 In situ composites synthesized by ultrasonic cavitation Transaction of Indian Institute of Metals
Dr.N.Gunasekar Associate Professor Effect of Fumigated Biodiesel on the performance and emission characteristics of a Single CylinderDiesel Engine International Journal of Mechanical Engineering and Technology
A. Mohan Assistant Professor Experimental investigation of tilted wick solar still using fabrics Australian Journal of Mechanical Engineering
Dr. K.Karthikeyan Assistant Professor(Sr.Grade) Experimental Investigations on Automobile Air Conditioners working with R134A and R290/R600A as an alternative Thermal Science, International Scientific Journal
Dr.P.Chandramohan Professor A comprehensive model and holistic approach for implementing an integrated management systems Journal of Computational and Theoretical Nanoscience
Dr.P.Chandramohan Professor Experimental investigations of nitrogen alloyed duplex stainless steel in dry milling process Journal of Engineering Science and Technology
Dr.P.Chandramohan Professor A review of additive manufacturing of α-β Ti alloy componentsthrough selective laser melting and laser metal deposition Journal of Engineering Science and Technology
Dr.P.Chandramohan Professor Effect of build direction on the microhardness and dry sliding wear behaviour of laser additive manufactured Ti-6Al-4V Materials Today: Proceedings
Dr.N.Gunasekar Associate Professor Experimental Investigations on a Direct Injection Diesel Engine Fuelled with Mixed Biodiesel Materials Today: Proceedings
Dr.P.Chandramohan Professor Effect of built orientation on direct metal laser sintering of Ti-6Al-4V Indian Journal of Engineering & Materials Sciences
R. Raghu Assistant Professor Effect of Centrifugal Speed in Abrasive Wear Behavior of Al-Si5Cu3/SiC Functionally Graded Composite Fabricated by Centrifugal Casting Transactions of the Indian Institute of Metals
R. Raghu Assistant Professor Characterization of mechanical properties and three-body abrasive wear of functionally graded Aluminium LM25/titanium carbide metal matrix Composite Materialwissenschaft und Werkstofftechnik
Dr.J.Yoganandh Associate Professor Effect of automated MIG welding process parameters on ASTM A 106 Grade B pipe weldments used in high-temperature applications Materials and Manufacturing Processes
Dr.P.Chandramohan Professor Laser additive manufactured Ti-6Al-4V alloy: Heat treatment studies Transactions of the Indian Institute of Metals
Dr.P.Chandramohan Professor Laser additive manufactured Ti-6Al-4V alloy: Tribology and corrosion studies International journal of advanced manufacturing technology
A. Vadivel Assistant Professor(Sr.Grade) Investigation of Thermal Performance of IC Engine with various coated piston head, alternate fuels and piston rings International Journal of Applied Engineering Research
Dr. V.Amarnath Associate Professor Comparative study of joining processes of high conductivity electrolytic tough pitch copper used in automotive industries International journal of Vehicle Structures and Systems
Dr.P.Karuppuswamy Professor and Head Comparative study of joining processes of high conductivity electrolytic tough pitch copper used in automotive industries International journal of Vehicle Structures and Systems
Dr.K.Karthikeyan Assistant Professor(Sr.Grade) Certain Studies On Eco-friendly Refrigerants Used In Vapour Compression Refrigeration System Of Automobile Air-Conditioner Advances in Natural and Applied Sciences
Dr.P.Karuppuswamy Professor and Head The Effect of Carburization of ASTM A36 Steel Substrate in improving Wear Properties of Plasma Sprayed WC–12% Co Coating Surface Review and Letters
Dr. C. Bhagyanathan Associate Professor The Effect of Carburization of ASTM A36 Steel Substrate in improving Wear Properties of Plasma Sprayed WC–12% Co Coating Surface Review and Letters
S. Sathish Assistant Professor(Sr.Grade) Investigation on Machinability Parameters and Mechanical Properties of LM6 Reinforced with Borosilicate Particles International Journal of Applied Engineering Research
S.Sathish Assistant Professor(Sr.Grade) Fatigue Life Analysis of Tool Die for the Hexagonal Bolt Forming System International Journal of Applied Engineering Research
S.Sathish Assistant Professor(Sr.Grade) Corrosion And Wear Behavior On Hybrid Composites Of Al-Mg-Si-Alloy Reinforced With Alumina And Groundnut Shell Ash International Journal of Applied Engineering Research
S.Sathish Assistant Professor(Sr.Grade) Mechanical Behaviour of A413 alloy Reinforced with Borosilicate Powder International Journal of Applied Engineering Research
Dr. C. Bhagyanathan Associate Professor Analysis of Heat Transfer Efficiency with Hybrid Metal Nano Fluid Using Computational Fluid Dynamics Techniques International Journal of Applied Engineering Research
Dr. C. Bhagyanathan Associate Professor Reduction of Rework in Rotor Manufacturing Using Quality Control Tools International Journal of Applied Engineering Research
Dr. C. Bhagyanathan Associate Professor Fabrication and Mechanical Analysis of Fiber Metal Laminates with addition of Nanoclay – GLARE International Journal of Applied Engineering Research
S.Sathish Assistant Professor(Sr.Grade) Experimental studies of the Mechanical and Microstructure Properties of LM6 Metal Matrix Composite with borosilicate Glass Reinforcement International Journal of Applied Engineering Research
B.Brailson Mansingh Assistant Professor(Sr.Grade) Experimental Study of automatic vegetable chopping machine International Journal of Applied Engineering Research
A. Mohan Assistant Professor Experimental Studies on Optimization of VCR Diesel engine parameters Using Taguchi Method International Journal of Applied Engineering Research
T.R.Sathish Kumar Assistant Professor(Sl.Grade) Review on Solar Still with Thermal Energy Storage International Journal of Applied Engineering Research
T.R.Sathish Kumar Assistant Professor(Sl.Grade) Performance Analysis on Regenerative Heat Exchanger with Paraffin Wax as Phase Change Material International Journal of Applied Engineering Research
Dr.N. Srimath Professor Optimization of surface roughness for cryogenically treated cemented inserts International Journal of Applied Engineering Research
Dr.P.Karuppuswamy Professor and Head Mathematical Modeling for Bead Geometry of Hardfacing Low Carbon Steel with Corrosive Resistant alloy using GMAW International Journal of Applied Engineering Research
Dr. C. Bhagyanathan Associate Professor Mathematical Modeling for Bead Geometry of Hardfacing Low Carbon Steel with Corrosive Resistant alloy using GMAW International Journal of Applied Engineering Research
B.Brailson Mansingh Assistant Professor(Sr.Grade) A literature review on various design parameters in high speed spindles International Journal of Applied Engineering Research
Dr.P.Karuppuswamy Professor and Head A literature review on various design parameters in high speed spindles International Journal of Applied Engineering Research
Dr.P.Karuppuswamy Professor and Head Review on Wear Behaviour of WC-Co Coating by Thermal Spray Process International Journal of Applied Engineering Research
Dr.P.Karuppuswamy Professor and Head Experimental Investigation on Machining Parameters of Aluminium Metal Matrix Composite Reinforced with Boron Carbide Particulates Machined Using Wire-cut Electrical Discharge Machining Process International Journal of Applied Engineering Research
S. Omprakasam Assistant Professor(Sr.Grade) Weldability Studies of High Strength Structural Steel for Marine Applications by GMAW Process International Journal of Applied Engineering Research
V. Srinivasan Assistant Professor(Sr.Grade) Weldability Studies of High Strength Structural Steel for Marine Applications by GMAW Process International Journal of Applied Engineering Research
K. Arunkumar Assistant Professor(Sr.Grade) Investigation of Mechanical properties of Cotton and Viscose Natural Fiber Reinforced Composite Materials International Journal of Applied Engineering Research
Dr.P.Karuppuswamy Professor and Head A study on Fabrication and Wear Characterisation of Al6061 Matrix Titanium Carbide particulate reinforced by stir casting method International Journal of Applied Engineering Research
J.Yokesh Kumar Assistant Professor Casting process optimization for reducing the cold shut defect in castings using response surface methodology Indian Journal of Engineering & Materials Sciences
Dr.J.Yoganandh Associate Professor Erosive Wear Behaviour of High-Alloy Cast Iron and Duplex Stainless Steel under Mining Conditions Journal of Materials Engineering and Performance